Plates &#45; White Plastic

Price: £18.20 (Excluding VAT at 20%)

Select LED Colour

Quantity:

Call Button with reassurance LEDs and Buzzer Ref: S1705P

A wall mounted CALL button in white ABS complete with a single gang mounting box This is a non-latching unit with a N.O. contacts. The LEDs (Available in RED, BLUE, GREEN or YELLOW) and buzzer have separate terminals for acknowledge purposes. The LED current limit resistor is provided for 12 vdc operation. The button contacts are rated at 50ma 24vdc resistive, N.O. press to close They should NOT be used for switch feeds to door strikes or mag locks etc.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Tactile button

Two high brightness LEDs

Integral buzzer

Price: £18.71 (Excluding VAT at 20%)

Select LED Colour

Quantity:

Reset Button with reassurance LEDs and Buzzer Ref: S1708P

A wall mounted RESET button in white ABS complete with a single gang mounting box This is a non-latching unit with a N.O. contacts. The LEDs (Available in RED, BLUE, GREEN or YELLOW) and buzzer have separate terminals for acknowledge purposes. The LED current limit resistor is provided for 12 vdc operation. The button contacts are rated at 50ma 24vdc resistive, N.O. press to close They should NOT be used for switch feeds to door strikes or mag locks etc.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Tactile button

Two high brightness LEDs

Integral buzzer

Price: £18.71 (Excluding VAT at 20%)

Select LED Colour

Quantity:

Multi function push button with LEDs and custom text Ref: S1760P

A wall mounted button in white ABS complete with a single gang low profile mounting box This is a MULTI-FUNCTION button that provides DPCO contacts rated at 1A 30vdc for use with maglocks and door strikes. The function of the button can be changed. (Momentary, Latching, Delayed latch and Commutate) Two LEDs and an integral buzzer are provided . This product requires a continuous supply of 12vdc.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Tactile button

Two high brightness LEDs

Integral buzzer

Unique on site labelling system

Price: £29.68 (Excluding VAT at 20%)

Select LED Colour

Quantity:

Overdoor Light with Hi Brightness LEDs Ref: S1736P

Overdoor light with 8 high brightness LEDs (RED, BLUE, GREEN or YELLOW) The LEDs are current limited for 12vdc operation. The single gang low profile ABS enclosure is fitted with a mark resistant decal

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Price: £20.45 (Excluding VAT at 20%)

Select LED Colour

Quantity:

Overdoor light and buzzer with LEDs Ref: S1778P

Overdoor light with 8 high brightness LEDs (RED, BLUE, GREEN or YELLOW) and an integral buzzer. The LEDs are current limited for 12vdc operation. The single gang low profile ABS enclosure is fitted with a mark resistant decal. For a high power siunder version see our S1788P range.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Price: £25.58 (Excluding VAT at 20%)

Select LED Colour

Quantity:

High Power (108dB) sounder with 8 ultra bright LEDs Ref: S1788P

High Power Overdoor Light/Sounder unit. There are separate drive inputs for both the light and the sounder. Housed in a low profile ABS ecnlosure with a scratch resistant decal. Four adjustable tones to give a sounder output at 12vdc up to 108db. LEDs are linked to sounder and strobe in sympathy.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Price: £34.19 (Excluding VAT at 20%)

Select LED Colour

Quantity:

8 way Indicator unit with sounder Ref: S1782P

8 way Indicator unit with sounder. There are separate drive inputs for both the individual lights and the sounder. Housed in a low profile ABS enclosure with a scratch resistant decal. We will label the facia with words of your choice or supply it blank. Please see "Text Requirements" download for further information.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Text Requirements

Price: £57.50 (Excluding VAT at 20%)

Select LED Colour

Quantity:

Facia label for S1782P Ref: LAB35109

A replacement facia for use with S1782P. Required to change wording on the S1782P after original installation.

Price: £15.03 (Excluding VAT at 20%)

Quantity:

Multi function Press to Exit button with green LED Ref: S1706PG

A wall mounted EXIT button in white ABS complete with a single gang low profile mounting box This is a MULTI-FUNCTION button that provides DPCO contacts rated at 1A 30vdc for use with maglocks and door strikes. The function of the button can be changed. (Momentary, Latching, Delayed latch and Comutate) Two green LEDs and an integral buzzer are provided . This product requires a continuous supply of 12vdc.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Tactile button

Two high brightness LEDs

Integral buzzer

Price: £29.68 (Excluding VAT at 20%)

Quantity:

Multi function Press to Enter button with green LED Ref: S1707PG

A wall mounted ENTER button in white ABS complete with a single gang mounting box This is a MULTI-FUNCTION button that provides DPCO contacts rated at 1A 30vdc for use with maglocks and door strikes. The function of the button can be changed. (Momentary, Latching, Delayed latch and Comutate) Two green LEDs and an integral buzzer are provided . This product requires a continuous supply of 12vdc.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Tactile button

Two high brightness LEDs

Integral buzzer

Price: £29.68 (Excluding VAT at 20%)

Quantity:

Press to Release button with Red and Green door status LEDs Ref: S1718PRG

Press to release button for use with access control systems. This button has two high brightness LEDs, one red and one green. Both are currentlimited for 12vdc operation. The pushbutton is rated at 30 vdc 50ma and is therefore not generally suitable for directly releasing door strike or maglocks

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Tactile button

Two high brightness LEDs

Price: £18.71 (Excluding VAT at 20%)

Quantity:

Door status indicator with Red and Green LEDs Ref: S1717PRG

Door status indicator with eight high brightness LEDs, four red and four green. Ideal for use with our door interlock systems INTERGUARD

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

High brightness LEDs

Price: £20.45 (Excluding VAT at 20%)

Quantity:

Two position keyswitch with one Red and one Green LED Ref: S1709PRG

Two position keyswitch mounted on a single gang white ABS plate. Two LEDs are provided, one red and one green, current limited for 12vdc operation. The decal is shown un-labelled but would normally be labelled O and I. The keyswitch has DPCO contacts rated at 3A 50vdc. Suitable for maglocks and door strikes.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Two position keyswitch

Two high brightness LEDs

Price: £30.74 (Excluding VAT at 20%)

Quantity:

Two position keyswitch with custom text Red and Green LEDs Ref: S1709PRGTC

Two position keyswitch mounted on a single gang white ABS plate. Two LEDs are provided, one red and one green, current limited for 12vdc operation. The decal is supplied loose to enable the product to be labelled on site. The keyswitch has DPCO contacts rated at 3A 50vdc. Suitable for maglocksand door strikes.

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Two position keyswitch

Two high brightness LEDs

Unique on site labelling system

Price: £32.29 (Excluding VAT at 20%)

Quantity:

6.35mm jack plug socket for use with S1631 Ref: S1732P

White plastic single gang box with 6.35mm (1/4in) jack plug socket for use with S1631. The mark resistant decal can be removed for on site labelling

Dimensions

87 x 87 x 36mm (Surface mount)

Back box supplied for surface mount

Flush mount 18mm onto standard galvanised box (Not supplied)

Mark resistant decal

Unique on site labelling system.

Price: £17.88 (Excluding VAT at 20%)

Quantity:

Pillow Push with 6.35mm jack plug Ref: S1631

Non-latching Pillow Push with 2m lead and 6.35mm jack plug to enable the pillow push to be exchanged for cleaning. This unit must be used with an S1663P Electronic Call point to create the latching and reset signals if used with our MG311000 nurse call system

The S1631 will require an S1732P (see below) or similar 6.35mm Jack Socket for connection into a system.

Price: £19.95 (Excluding VAT at 20%)

Quantity:

Double Gang Set Indicator Plate Ref: S319i

Double gang set indicator plate - Jumbo LED
20mm red LED mounted upon double gang engraved plastic plate.
(LED terminated for 12vdc operation)

Price: £58.55 (Excluding VAT at 20%)

Quantity:

Electronic Call Point Ref: S1663P

Electronic Call Point to make and reset normal and emergency calls. An integral timer generates late attendance calls. Facilities are provided for Pull Cord (See S1600 below) &/or (S1631) Pillow Push input. There is also an output to drive Overdoor Lights/Sounders units. ABS plastic C/W surface mounting box (Not Shown)

Price: £47.76 (Excluding VAT at 20%)

Quantity:

Pack of 2 anti tamper screws for stainless & plastic plates Ref: FIX/11

These anti tamper screws are the hex-pin type M3.5 x 25mm suitable for all of our stainless steel and plastic plates.

Price: £2.25 (Excluding VAT at 20%)

Quantity:

Pin-Hex antitamper screwdriver bit to suit FIX/11 Ref: FIX/11/ATS

Price: £7.90 (Excluding VAT at 20%)

Quantity:

Ceiling Pull Cord Ref: S1600

Non-latching ceiling pull cord with re-assurance LED for use directly with AIDLARMs above.
This unit has voltage free SPCO contacts. The LED incorporates a current limit resistor for use on 12vdc.
The cord is 2.5metres long. However, it is considered against best practise to install a pull cord into a mental health unit due to the risk it poses. Call buttons in the toilet or Panic strip is recommended.

Price: £12.87 (Excluding VAT at 20%)

Quantity:

Cord set for S1600 Pull cord Ref: S1600-CORD

This is a replacement cord set for the S1600 above, it is identical to the cord supplied with the S1600.
The cord is 2.5metres long. However, it is considered against best practise to install a pull cord into a mental health unit due to the risk it poses. Call buttons in the toilet or Panic strip is recommended.

Price: £4.84 (Excluding VAT at 20%)

Quantity:

SaniPull Anti Ligature Hygenic Pull cord - Orange Ref: S1600ALCORD

Sanipull is a hygenic true anti-ligature replacement cord set suitable for virtually any pull cord.
The smooth finished cord can be easily wiped clean. The cord has holes in it at regular intervals which allow the cord to snap into small pieces if more than 13KG force is applied.

3m cord provided with universal fitting compatible with most pull cord switches and two bangles.

Price: £9.99 (Excluding VAT at 20%)

Quantity:

Aidalarm Input State Monitor Mains powered Ref: A6004

This AIDALARM unit is designed for use with any slow acting normally open contact that closes for an alarm and opens when the alarm is clear. Typical examples include water level switches and fridge / freezer over temperature switches.

Operation (Including optional remote indication unit S1678RP)
In this configuration the AIDALARM is sited at a manned point for people to take action and it will give audible and visual indication. The call is silenced and reset at the AIDALARM.
An optional S1678RP Light / Sounder can be fitted at the point of call.
When the contact closes, a warning is given at both the AIDALARM and the remote point. Pressing the mute button will result in the AIDALARM silencing but leave an led flashing to indicate that the unit has been silenced. As re-assurance in the vicinity of the point of call, the remote led will illuminate and the sounder will bleep every 20 seconds approx. to warn of the problem. When the contact opens again the alarm warning is given again, but this time when the mute button is pressed, the sounder will silence and the leds will clear.

A label to your own specification of wording can be requested to identify the exact use of the unit. An example of this is shown and the picture of the unit opposite.