Call button with re-assurance LED Stainless steel
£71.03
Ex Vat
In stock
Product code
S1705S
Call button with re-assurance LED Stainless steel
Flush fitting stainless steel engraved call point with a vandal resistant button and re-assurance LED. This is a non-latching unit with single pole change over contacts. Separate terminals are provided for the LED (red). The LED current limit resistor is provided for 12 vdc operation.
- Specification
- Led Current - 20mA@12vdc
- Switch Contacts - Single pole normally open 2A@ 30vdc
- Sounder Current - N/A
- Visual Indication - 1 x Red LEDs
- Integral Sounder Level - N/A
- Tamper - N/A
- Material - 316 Grade Stainless Steel
- Dimensions - 86 x 86 x 2mm - Facia
- 38mm galvanised back box supplied
- Surface mounted using part no. S0610 listed below
- Weight - 0.25kg
- IP Rating - IP65 front side contact area
- Approvals - CE and RoHs compliant
Weather gasket Code: WG1 is available for the rear of the plate if required
Anti tamper screws available, see related products below
Country of Origin | UK |
---|---|
Condition | New |
SKU | S1705S |
Associated Product Codes | S1705S |
Warranty | 3 Years |
- | Installation Instructions for S1705S |
- | Product Information Sheet for S1705S |
Write Your Own Review
Check items to add to the basket or