Call button with re-assurance LED Stainless steel

£71.03 Ex Vat
In stock
Product code
S1705S

Call button with re-assurance LED Stainless steel

Flush fitting stainless steel engraved call point with a vandal resistant button and re-assurance LED. This is a non-latching unit with single pole change over contacts. Separate terminals are provided for the LED (red). The LED current limit resistor is provided for 12 vdc operation.

    Specification
  • Led Current - 20mA@12vdc
  • Switch Contacts - Single pole normally open 2A@ 30vdc
  • Sounder Current - N/A
  • Visual Indication - 1 x Red LEDs
  • Integral Sounder Level - N/A
  • Tamper - N/A
  • Material - 316 Grade Stainless Steel
  • Dimensions - 86 x 86 x 2mm - Facia
  • 38mm galvanised back box supplied
  • Surface mounted using part no. S0610 listed below
  • Weight - 0.25kg
  • IP Rating - IP65 front side contact area
  • Approvals - CE and RoHs compliant

Weather gasket Code: WG1 is available for the rear of the plate if required
Anti tamper screws available, see related products below


More Information
Country of Origin UK
Condition New
SKU S1705S
Associated Product Codes S1705S
Warranty 3 Years
- Installation Instructions for S1705S
- Product Information Sheet for S1705S
Write Your Own Review
You're reviewing:Call button with re-assurance LED Stainless steel
Your Rating

Related products

Check items to add to the basket or
Copyright © 2022-Hoyles. All rights reserved.