Press to Unlock button with LEDs

£82.28 Ex Vat
In stock
Product code
S1720SX

Press to Unlock button with LEDs

Flush fitting stainless steel vandal resistant push button with one red and one green flat LED in chrome bezels. Engraved with Vacant and Engaged. This is a non-latching unit with single pole change over contacts. Separate terminals are provided for each LED. The LED current limit resistor is provided for 12 vdc operation.
Designed specifically for use with our range of Shared bathroom controllers IGSFB and IGSFC.

    Specification
  • Led Current - 20mA per LED @12vdc
  • Switch Contacts - Single pole normally open 2A@ 30vdc
  • Sounder Current - N/A
  • Visual Indication - 1 x red LED 1 x green LED
  • Integral Sounder Level - N/A
  • Tamper - N/A
  • Material - 316 Grade Stainless Steel
  • Dimensions - 86 x 86 x 2mm - Facia
  • 38mm galvanised back box supplied
  • Surface mounted using part no. S0610 listed below
  • Weight - 0.28kg
  • IP Rating - IP65 front side contact area
  • Approvals - CE and RoHs compliant

Weather gasket Code: WG1 is available for the rear of the plate if required
Anti tamper screws available, see related products below


More Information
Country of Origin UK
Condition New
SKU S1720SX
Associated Product Codes S1720SX
Warranty 3 Years
- Installation Instructions for S1720SX
- Product Information Sheet for S1720SX
Write Your Own Review
You're reviewing:Press to Unlock button with LEDs
Your Rating

Related products

Check items to add to the basket or
Copyright © 2022-Hoyles. All rights reserved.