Keyswitch trapped in the ON position with two LEDs

£73.61 Ex Vat
In stock
Product code
S1729ST1
Two position keyswitch trapped in the ON position with one red and one green LED.

Flush fitting stainless steel engraved two position keyswitch with one red and one green flat LED in chrome bezels. This is a double pole unit with change over contacts. The keyswitch on this version is trapped in the 1 position. Separate terminals are provided for the LEDs. The LED current limit resistor is provided for 12 vdc operation.

Specification:
  • Led Current - 20mA per LED @12vdc
  • Switch Contacts - DPCO 2A @30vdc
  • Sounder Current - N/A
  • Visual Indication -1 x red LED 1 x green LED
  • Integral Sounder Level - N/A
  • Tamper - N/A
  • Material - 316 Grade Stainless Steel
  • Dimensions - 86 x 86 x 2mm - Facia
  • 38mm galvanised back box supplied
  • Surface mounted using part no. S0610 listed below
  • Weight - 0.28kg
  • IP Rating - IP65 front side contact area
  • Approvals - CE and RoHs compliant

Weather gasket Code: WG1 is available for the rear of the plate if required
Anti tamper screws available, see related products below


More Information
Country of Origin UK
Condition New
SKU S1729ST1
Associated Product Codes S1729ST1
Warranty 3 Years
- Installation Instructions for S1729ST1
- Product Information Sheet for S1729ST1
Write Your Own Review
You're reviewing:Keyswitch trapped in the ON position with two LEDs
Your Rating

Related products

Check items to add to the basket or
Copyright © 2022-Hoyles. All rights reserved.