Flush fitting stainless steel vandal resistant push button with one red and one green flat LED in chrome bezels. Engraved with Press to lock/unlock. This is a non-latching unit with single pole change over contacts. Separate terminals are provided for each LED. The LED current limit resistor is provided for 12 vdc operation.
Designed specifically for use with our range of Shared bathroom controllers IGSFB and IGSFC.

Specification

• Led Current - 20mA per LED @12vdc
• Switch Contacts - SPCO 2A@ 30vdc
• Sounder Current - N/A
• Visual Indication - 1 x red LED 1 x green LED
• Integral Sounder Level - N/A
• Tamper - N/A
• Material - 304 Grade Stainless Steel
• Dimensions - 86mm x 86mm x 2mm - Facia
• 38mm galvanised back box supplied
• Surface mounted using part no. S0610 listed below
• Weight - 0.28kg
• IP Rating - IP65 to maintain the IP rating a suitable sealant or gasket for the rear of the plate is required
• Approvals - CE and RoHs compliant