| Blog
e: sales@hoyles.com | t: +44 (0)1744 886600
Menu ccc
Redimon v4 12vdc powered Panic Strip monitor
Move your mouse over image or click to enlarge
Redimon v4 12vdc powered Panic Strip monitor Redimon v4 12vdc powered Panic Strip monitor

Redimon v4 12vdc powered Panic Strip monitor

Product code:

REDIMON412

Availability: In stock

Excl. VAT: £47.86 Incl. VAT: £57.43
Open Circuit Momentary Monitor - 12 volt dc powered

Be the first to review this product

Details

REDIMON is a 12vdc powered unit which can fully monitor two open circuit momentary devices such as Dado Panic Strip, push buttons or foot switches and gives volt free changeover contacts for both alarm and fault conditions. An end of line resistor (6k8) is fitted at the remote ends of Dado Panic Strip. Pressing the Dado Panic Strip creates a short circuit which will be detected as an alarm condition. If the Dado Panic Strip becomes disconnected in any way a fault condition is generated. An integral reset button is used to reset the unit after an alarm event. Status LEDs are provided, normally a green LED would be illuminated for system healthy, the red LED indicates an alarm, and alternate flashing of the red and green LEDs would indicate a fault condition. REDIMON also provides a 12vdc output for driving strips of LEDs in Dado Panic Strip and can be configured to drive the LEDs in 3 different ways.

  • 12 volt dc powered
  • End Of Line EOL resistor (6k8)
  • Dual 6k8 Inputs
  • Double Press Option
  • Alarm Relay Output
  • Fault Relay Output
  • Dado Panic Strip LED driver output
  • Reset Button
  • LED Indicators
  • Uses an Open circuit System(such as Dado Panic Strip)
  • Secures Open Circuit Devices
  • Dimensions 87 x 87 x 36mm

The REDIMON gives a 12V output for driving strips of LEDs in Dado Panic Strip, these LEDs can operate in 3 different ways which is controlled by adjusting the potentiometer. To change the operation of the LEDs adjust the potentiometer to positions 1, 2 or 3. Position 1: The LEDs will be on then when the unit goes into alarm the LEDs will start to flash. Position 2: The LEDs are off then when the unit goes into alarm the LED’s will turn on. Position 3: The LEDs are off, then when the unit goes into alarm the LEDs will begin to flash.

Additional Information

FAQs No

Sorry No Video Available

Delivery Information

We offer UK Next Day and UK 2-3 Day shipping options on all stock products with Free UK Shipping on orders over 100 GBP before tax.

International delivery rates vary by country.

Please visit our Delivery Information  page for a full explanation of our shipping arrangements.

Sorry No FAQs Available

Product Information Sheet

Product Information Sheet for REDIMON412

Installation Instructions

Installation Instructions for REDIMON412

Related Products

< >