Reset Button with reassurance LEDs and Sounder

A wall mounted Reset button in white ABS complete with a single gang mounting box. This is a non-latching unit with N/O contacts. The LEDs (available in RED, BLUE, GREEN or YELLOW) and sounder have separate terminals for acknowledge purposes. The LED and sounder current limit resistor is provided for 12 vdc operation. The button contacts are rated at 50mA @ 12vdc. N/O press to close.
They should NOT be used for switch feeds to door strikes or mag locks etc.

Specification

• Led Current - 35mA @12vdc
• Sounder Current - 25mA @12vdc
• Switch Contacts - 50mA 12vdc
• Visual Indication - 2 x LEDs
• Integral Sounder Level -70db @10cm
• Tamper - N/A
• Material - White ABS
• Weight - 0.12kg
• 87mm x 87mm x 36mm (Surface mount)
• IP Rating - IP44 to maintain the IP rating a suitable sealant or gasket for the rear of the plate is required
• Approvals - CE and RoHs compliant
• Back box supplied for surface mount
  
• Flush mount onto18mm standard galvanised box - Not supplied
  
• Mark resistant decal
  
• Tactile button
  
• Two high brightness LEDs