False alarm filter

£67.77 Ex Vat
In stock
Product code
S451-B

Boxed false alarm filter

The S451 is an interface relay that sits between a detector and an intruder alarm control panel to filter off occasional trips caused by the environment such as wildlife, and provide a momentary output when the alarm criteria are met. eg. 3 trips in a 30 second window.

The S451 can monitor either a normally closed, (open to alarm), or normally open, (close to alarm), contact. The momentary output is fixed at 2 seconds so it can be detected by most alarm equipment. As the S451 doesn't latch, it never requires resetting.

  • Six mounting holes provided for more permanent fixing
  • Knock outs for cable entry
  • Intended for internal use only
  • Screw terminals for easy connection

This unit is provided housed in a single gang white ABS enclosure.
Relay Dimensions - L80 x W74 x D16mm
Box Dimensions - L87 x W87 x D36mm


More Information
Country of Origin UK
Condition New
SKU S451-B
Associated Product Codes S451-B
Warranty 3 Years
- Product Information Sheet for S451-B
Write Your Own Review
You're reviewing:False alarm filter
Your Rating
Copyright © 2022-Hoyles. All rights reserved.