Two position Keyswitch Red and Green LEDs plus buzzer
£46.89
Ex Vat
In stock
Product code
S1709PRGB
Two position keyswitch with one Red and one Green LED plus a 12vdc buzzer
Two position keyswitch mounted on a single gang white ABS plate. Two LEDs are provided, one red and one green, current limited for 12vdc operation. A 12vdc buzzer is also included. The decal is shown labelled O and I, but would normally be supplied blank. The keyswitch has DPCO contacts rated at 1A 30vdc. Suitable for maglocks and door strikes.
- Specification
- Led Current - 17.5mA per LED @12vdc
- Sounder Current - 40mA @ 12vdc
- Switch Contacts - 1A 30vdc
- Visual Indication - 2 x LEDs one red one green
- Integral Sounder Level - 70db@10cm
- Tamper - N/A
- Material - White ABS
- Weight - 0.17kg
- IP Rating - IP44 to maintain the IP rating a suitable sealant or gasket for the rear of the plate is required
- Approvals - CE and RoHs complaint
- Back box supplied for surface mount
- 87mm x 87mm x 36mm (Surface mount)
- Can be Semi Flushed onto standard back box (Not supplied)
- Mark resistant decal
- Two position keyswitch - removeable in both positions
- Two high brightness LEDs
Anti tamper screws available, see related products below
Country of Origin | UK |
---|---|
Condition | New |
SKU | S1709PRGB |
Associated Product Codes | S1709PRGB |
Warranty | 3 Years |
- | Installation Instructions for S1709PRGB |
- | Product Information Sheet for S1709PRGB |
Write Your Own Review
Check items to add to the basket or