Wireless Disabled Toilet Alarm Kit - Mains Powered Control

£431.53 Ex Vat
In stock
Product code
A600WKITM

Please note: For orders being shipped outside of the UK batteries will not be supplied with this product due to shipping restrictions.



This wireless kit has a mains powered controller and battery powered ancillary items. Meeting the requirements for emergency signalling systems for disabled persons and can help compliance with BS8300, the requirements of the Equality Act 2010 and Building Regs Part M. Everything is provided in the kit and all required batteries are supplied, delivering an effective, fully compliant, simple to install and simple to use system.

Battery status is monitored by the controller. When the batteries require replacing, the controller will indicate a fault. When fault is indicated replace all batteries within the system. The system should be tested monthly and we recommend that all batteries are replaced every twelve months.
This system could also be used as an emergency assistance alarm in changing rooms, interview rooms, reception areas etc.


Specification:
  • Wireless Technology
  • Operates on ISM Bands
  • BS8300 Compliant
  • Controller with internal buzzer
  • Mains Powered Controller with 6 x AA standby batteries
  • Volt free changeover double pole relay contacts enable remote signalling output
  • Battery status of ancillary devices is monitored by controller
  • Low battery warning
  • All ancillary items are battery powered
  • Audible & Visual Signalling and indication
  • All required batteries supplied
  • Controller Dimensions - 175 x 125 x 60 tapering to 50mm

This WIRELESS mains powered kit comprises:
1 x A600WM Aidalarm controller
1 x S1600-W RED pull cord
1 x Pull cord instruction label with braille text
1 x S1708W reset button with braille text
1 x S1778W overdoor light/sounder with wheel chair symbol
6 x AA alkaline batteries for controller

How the Aidalarm works
1. The Aidalarm controller should be sited where staff are located who can respond to an emergency call.
2. Ceiling pull cord and optional Dado panic strip or call buttons are situated in the toilet or other area where assistance may be required. Note: If using Dado Panic Strip a S1705W Call button will also be required.
3. Pulling the cord or pressing the panic strip/call button generates an audible/visual alarm at both the WC area and at the control panel. An LED will flash at the pull cord giving the caller reassurance that the call has been placed, this LED will extinguish when it receives acknowledgement from the controller.
4. The call can be silenced by pressing the button on the front of the control panel.
5. The audible indicators at the WC will bleep to re-assure the caller.
6. Should the cord be pulled again while in the silenced state, the system will call again.
7. Non-attendance will cause the panel to bleep every 40 seconds as a warning.
8. The system can only be reset by the Press to Reset button located at or near the point of call.

Use code: A600WBATM to order Replacement Battery pack for A600WKITM – Pack Comprises 1 x D Type Lithium Batteries, 2 x CR123 Type Lithium Batteries and 6 x AA Type Alkaline back up batteries for controller.

Please Note: Cable and Fixings are not supplied.


More Information
Country of Origin UK
Condition New
SKU A600WKITM
Associated Product Codes A600WKITM
Warranty 3 Years
- Installation Instructions for A600WKITM
- Product Information Sheet for A600WKITM
Write Your Own Review
You're reviewing:Wireless Disabled Toilet Alarm Kit - Mains Powered Control
Your Rating

Related products

Check items to add to the basket or
Copyright © 2022-Hoyles. All rights reserved.