Flush fitting stainless steel engraved call point with a vandal resistant button and re-assurance LED. This is a non-latching unit with single pole change over contacts. Separate terminals are provided for the LED (red). The LED current limit resistor is provided for 12 vdc operation.

Specification

• Led Current - 20mA@12vdc
• Switch Contacts - SPCO 2A @30vdc
• Sounder Current - N/A
• Visual Indication - 1 x Red LEDs
• Integral Sounder Level - N/A
• Tamper - N/A
• Material - 304 Grade Stainless Steel
• Dimensions - 86mm x 86mm x 2mm - Facia
• 38mm galvanised back box supplied
• Surface mounted using part no. S0610 listed below
• Weight - 0.25kg
• IP Rating - IP65 to maintain the IP rating a suitable sealant or gasket for the rear of the plate is required
• Approvals - CE and RoHs compliant