Two LEDs and Button with Custom text Stainless steel
£88.41
Ex Vat
Lead time for this item is 3-5 working days
Product code
S1715STC
Two LEDs and Button with Custom text Stainless steel
Flush fitting stainless steel button with one red and one green flat LED in chrome bezels. This is a non-latching unit with single pole change over contacts. Separate terminals are provided for the LED's. The LED current limit resistor is provided for 12 vdc operation.
Supplied with lasered text of your choice. Specify text required when ordering - 45 characters maximum.
- Led Current - 20mA per LED@12vdc
- Switch Contacts - Single pole normally open 2A@ 30vdc
- Sounder Current - N/A
- Visual Indication - 1 x red LED 1 x green LED
- Integral Sounder Level - N/A
- Tamper - N/A
- Material - 316 Grade Stainless Steel
- Permanently laser marked
- Ideal for hygienic environments
- Dimensions - 86 x 86 x 2mm - Facia
- 38mm galvanised back box supplied
- Surface mounted using part no. S0610 listed below
- Weight - 0.26kg
- IP Rating - IP65 front side contact area
- Approvals - CE and RoHs compliant
Weather gasket Code: WG1 is available for the rear of the plate if required. Anti tamper screws available, see related products below.
Country of Origin | UK |
---|---|
Condition | New |
SKU | S1715STC |
Associated Product Codes | S1715STC |
Warranty | 3 Years |
- | Installation Instructions for S1715STC |
- | Product Information Sheet for S1715STC |
Write Your Own Review
Check items to add to the basket or