Two LEDs and Button Stainless steel

Flush fitting stainless steel button with one red and one green flat LED in chrome bezels. This is a non-latching unit with single pole change over contacts. Separate terminals are provided for the LED's. The LED current limit resistor is provided for 12 vdc operation.

• Led Current - 20mA per LED@12vdc
• Switch Contacts - Single pole normally open 2A@ 30vdc
• Sounder Current - N/A
• Visual Indication - 1 x red LED 1 x green LED
• Integral Sounder Level - N/A
• Tamper - N/A
• Material - 316 Grade Stainless Steel
• Dimensions - 86 x 86 x 2mm - Facia
• 38mm galvanised back box supplied
• Surface mounted using part no. S0610 listed below
• Weight - 0.26kg
• IP Rating - IP65 front side contact area
• Approvals - CE and RoHs compliant

Weather gasket Code: WG1 is available for the rear of the plate if required. Anti tamper screws available, see related products below.